Thermal transfer printing is a fast and clean process with no warm-up or cooling time required. It is not a wet or dirty process either and the results are instantly dry, requiring no curing. By using a single-pass ribbon, the print is perfect from the start to the very end of a roll, making it the standard for producing barcodes and variable information labels, on-demand.
A thermal transfer label printer from the likes of Avery, Sato, Novexx, TEC, Zebra etc produces text, barcodes and graphics by using a fixed low-powered print head which spans the entire width of the print area. The print head comprises of a single row of thousands of tiny elements (“dots”) of a size typically 8 or 12 dots per millimetre, yeilding a print resolution of 200dpi or 300dpi – but even 600dpi is available.
What is Meant By Flat Head and Near-Edge Print Heads?
There are two types of print head: “Flat” and “Near-Edge” and so there are two types of thermal ribbon. There are benefits of each technology which merits another article in its own right. One is neither “better” than the other without explanation but suffice to say, you must match your thermal transfer printer with the correct thermal transfer ribbon! For example, all Zebra printers use flat print-heads while others such as TEC, use near-edge. Avery Dennison and others produce a range of label printers that take both types, so it is essential to know which head is in your machine before you purchase the wrong ribbon. Using a flat head ribbon in a near edge printer or vice-versa, won’t dammage the printer but you won’t get very acceptable results. Beware though, you could drastically reduce your print head life by increasing print head temperature and increasing the head pressure excessively in attempt to improve print quality using the wrong type of ribbon! A false economy if ever there was one, as print heads aren’t cheap.
Over time, thermal print heads will wear out eventually and you will notice this as each element “dot” stops working, the appearance of lines (actually, non-printed lines, to be correct) will get increasingly worse. The dots are like lightbulbs – one day one will stop working and more will tend to fail afterwards. However, it is quite ok to carry on printing with an odd dot “down” unless so many are missing that either the printed output looks a mess or worse still, they affect the readability of the barcode.
To prolong the life of your print head it is essential to use a good quality ribbon with a low-friction back coating which minimises wear on the head and to also match the correct ribbon to your printer, so that you can lower the head power and reduce the pressure applied. You should of course clean your print head regularly, the frequency of which is dependent on usage and will be advised by your printer/ribbon supplier.
We stock a wide range of ribbons, from general purpose wax grades, high performance wax/resin grades and pure resin ribbons for specialist applications, all in a wide choice of print widths and matched to your specific label printer model, many available for next-day delivery. If you’re not sure which ribbon you need, then don’t worry, we will help identify the correct ribbons that are compatible for your specific printer, suitable for printing on various label materials.
- The Difference Between Second-hand Copiers, Ref...
- What Is Thermal Transfer Ribbon
- Features Of Thermal Transfer Ribbon
- Classification Of Thermal Transfer Ribbon
- Application Of Thermal Transfer Ribbon
- What Is Ribbon Cartridge
- Introduction To Ribbons
- Structure Of Ribbon Cartridge
- Common Faults And Solutions Of Ribbon Cartridge
- How Toner Cartridge Works
- Global Sources Electronics Show
- 2017 ASTA & 37TH GITEX TECHNOLOGY
- ASTA 2017 China International POS Machines & Re...
- BUYERS FROM 76 COUNTRIES TO VISIT RT IMAGING CA...
- ASTA EVERYWHERE
- Happy Lantern Festival
- ASTA Will Participate In Asia Expo In Shanghai ...